1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Some dragging.

Discussion in 'Showcase - show us your work.' started by Tomcio, Sep 9, 2018.

  1. Tomcio

    Tomcio Brush Navigator Bar Member

    I Have done it over factory sprayed PU.
    Liquin Original tinted with white and a touch of raw umber.



    FB_IMG_1536513328533.jpg FB_IMG_1536513338473.jpg FB_IMG_1536513331847.jpg FB_IMG_1536513334803.jpg
    FB_IMG_1536513316869.jpg
    FB_IMG_1536513308798.jpg FB_IMG_1536513300814.jpg

    It wasn't easy as it was place under pressure and things were happening : FB_IMG_1536513296926.jpg FB_IMG_1536513321918.jpg
    Other trades damaging my work
    But by the end it turned okay.
     

    Attached Files:

    Last edited: Sep 9, 2018
    Daf, stevy, YTS 83' and 8 others like this.
  2. Wayners

    Wayners I Taut I Taw A Puddy Tat Bar Member

    Fair play :doff:
     
    Tomcio likes this.
  3. Gary scott

    Gary scott Tradesman Bar Member

    Very. Very VERY NICE
     
    Tomcio likes this.
  4. Tomcio

    Tomcio Brush Navigator Bar Member

    Thank you gentlemen...it would be perfect if the conditions on site will allow me working in peace...on day two AC crew started testing AC unit I had temp. fluctuations from 10 to 27℃ during scumbling...so can't really control what I was doing:cry:
    And by the end of the day one sparky started to walk on not fully dry worktops.:archieslap:I don't really like commercial jobs.
     
    Gary scott likes this.
  5. AndyClassOne

    AndyClassOne PPS Master Craftsman PPS Painter Bar Member

    Wonderful job Tomcio.....and such a neat and tidy work area :thumbsup:
     
    Tomcio likes this.
  6. Tomcio

    Tomcio Brush Navigator Bar Member

    Thank you.

    Tidy was after Tomcio made it clean and tidy:yes:
    FB_IMG_1536513325576_1.jpg
     
  7. Teho

    Teho PPS Master Craftsman Bar Member

    nice job there . a couple of tips if i may ?
    tape up your runs after base-coat so you can drag right over the tape to avoid colour build up at the seams and it also gives you a nice line and defines the panel on things like octagonals , and do alternate panels remove before topcoat.

    using a laser level on a tripod as a guide when doing large areas for your brush .
     
    Tomcio likes this.
  8. Teho

    Teho PPS Master Craftsman Bar Member

    what scumble did you use ? tropical ?
     
  9. Tomcio

    Tomcio Brush Navigator Bar Member

    @Tehomas bow thank you.
    It will be done with no mistakes if I would be allowed to work on it for a week whiteout been disrupted.
    This place was a hell where everybody, all other trades were late on the dead line after which penalties 10.000 € per day or something like that was charged..I had a company of sparkies, chippies, plasterers, tilers, windows/doors installers available for my entertainment.
    In this location I also finished furniture an woodwork from my other post
    http://www.painterspitstop.com/threads/medium-for-dragging-and-antiquing.12941/
    (The furniture was in need of more work but I wasn't allowed to do so)..
    For this gray units:
    I have three days to get it done if not
    my contractor would have payment issue as by the end of that week the hotel opened and in this room the Taoiseach (prime minister), had meetings with the hotel owners.

    I used one coat of Liquin Original by Winsor&Newton, worktops varnished afterwards with coat of Woodoc floor sealer.
    The air conditioning unit helped with drying:doff:
     
    Last edited: Sep 11, 2018
  10. Teho

    Teho PPS Master Craftsman Bar Member

    Terrible working conditions ,I feel for you .
    I just dont take work on under these kind of constraints .
     
    Tomcio likes this.
  11. Tomcio

    Tomcio Brush Navigator Bar Member

    Thank you for the compassion @Tehomas bow .You see no one was prepared for this or expect it...
    I wanted to be there with my work to harvest it for my port folio as it's well known worldwide 5 star hotel..
    It was such a disappointment..
    It was very alright money wise but my heart got broken...
    ashford-castle-web-offset.jpg
    The quality of my work suffered but in this world more important is to get few milon of Euro for the wedding event than have a masterpiece in the spa or tea rooms.
     
    Last edited: Sep 11, 2018
  12. Teho

    Teho PPS Master Craftsman Bar Member

    That's a real shame,this would have been a nice one for your portfolio indeed ,meybe you should go work for Lynch & Manning instead
     
    Tomcio likes this.
  13. stevy

    stevy PPS Master Craftsman Bar Member

    Beautiful job mate. :thumbup:
     
    Tomcio likes this.
  14. Tomcio

    Tomcio Brush Navigator Bar Member

    Thank you:doff:
     

Share This Page